Sound source localization

HARK FORUM Sound source localization

Viewing 15 posts - 1 through 15 (of 23 total)
  • Author
    Posts
  • #1408
    Riya Parth Dube
    Participant

      Hello I am trying to do sound source localization in HARK with a wav file.
      I get the following error with localise music. See attachment for reference.
      Thank you.

      #1410
      catadman.jkl
      Participant

        Hi Riya,

        The reference files may have not been attached successfully.
        Kindly re-upload them and let us know if there is a problem.

        Thank you,
        HARK Support Team

        #1411
        Riya Parth Dube
        Participant

          Please find my reference error file. And network file.

          #1412
          catadman.jkl
          Participant

            Hi Riya,

            The files that you’re referring to are still not attached.
            Kindly check if the files do not exceed the maximum file size allowed.
            Also, will it be possible for you to send a screenshot of the error that you have encountered?

            I get the following error with localise music.

            Thank you,
            HARK Support Team

            • This reply was modified 4 years, 2 months ago by catadman.jkl.
            #1414
            catadman.jkl
            Participant

              Hi Riya,

              Upon checking, there was a problem with the server that is why the files were not uploaded successfully.
              Apologies for the inconvenience.
              Kindly re-upload the files.

              Thank you,
              HARK Support Team

              #1415
              Riya Parth Dube
              Participant
                #1418
                catadman.jkl
                Participant

                  Hi Riya,

                  Thank you for these files.
                  However, we would like to see the parameters that you have provided to the nodes especially in LocalizeMUSIC.
                  Will it be possible for you to also attach the network file that you’re using?

                  Thank you,
                  HARK Support Team

                  #1419
                  Riya Parth Dube
                  Participant

                    PLease find the network file attached. thank you.

                    #1423
                    Riya Parth Dube
                    Participant

                      I am not able to upload my network file.

                      #1431
                      catadman.jkl
                      Participant


                        Test upload

                        #1433
                        catadman.jkl
                        Participant

                          Hi Riya,

                          Please disregard the message above.
                          It is just a test if we are able to upload a file.
                          May we ask for you to try to upload again?
                          Kindly also check if the network file you are trying to upload is a .n file same as above.
                          Thank you for your patience.

                          Best regards,
                          HARK Support Team

                          #1434
                          Riya Parth Dube
                          Participant

                            Please find my network file.

                            Attachments:
                            #1439
                            Riya Parth Dube
                            Participant

                              I have uploaded my network file. Please help me with this. Thank you.

                              #1440
                              catadman.jkl
                              Participant

                                Hi Riya,

                                The parameter values of these nodes have been provided with incorrect/empty values:

                                In NormalizeMUSIC:

                                1. TF_CHANNEL_SELECTION
                                This should correspond to the number of channels of the microphone array of the transfer function file that you have referred in the parameter A_MATRIX.
                                For example, if the microphone array of your transfer function has 8 channels, the value should be: <Vector<int> 0 1 2 3 4 5 6 7>

                                2. SAMPLING_RATE
                                This is the sampling frequency of input acoustic signal. The data type must be int and the default value is 16000.

                                3. A_MATRIX
                                The file name of the transfer function file that will be used in this network. Please refer to this link for generating a transfer function.

                                In DisplayLocalization:
                                1. WINDOW_NAME
                                The GUI window name. The data type should be string and the default value is ‘Source Location’.

                                Please let us know if you need more information.

                                Thank you,
                                HARK Support Team

                                #1441
                                Riya Parth Dube
                                Participant

                                  HI
                                  can i know how can i create a transfer function for a input from wav file and not from mic.
                                  thank you
                                  riya

                                Viewing 15 posts - 1 through 15 (of 23 total)
                                • You must be logged in to reply to this topic.